[Mac] Untethered Tutorial

[zackotronic]

Now, before I start I am in no way able to offer support because i pieced this tutorial together from a couple of other tutorials. Thanks goes to MuscleNerd (parts of iphone-dev team readme is in here) and also thanks to Jaikob (his bspatch coding is also used), also Jedipottsy for his youtube video. I tried to make this is as simple as possible and broke the steps down as much as i could.

Things Needed
PwnageTool
redsn0w lite 101
LIBUSB
24kpwn (LLB.n72ap.RELEASE.patch)
2.2.1 IPSW
2.1.1 IPSW

1) Install LIBSUB

2) Copy the FirmwareBundles and CustomPackages directories into your PwnageTool.app/Contents/Resources directory
    Watch the following video (http://www.youtube.com/watch?v=WCqb51-1o3Q) in order to show you how to do this properly.

3) Create a custom 2.2.1 ipsw with PwnageTool in Advanced mode.  Don't enable custom boot logos.
   Name It 221pwnedFirmware.ipsw

4) Rename your 211 ISPW to a .zip file and extract.

5) From the official 2.1.1 ipsw, extract this file:
   iBSS.n72ap.RELEASE.dfu    (name it iBSS211.dfu)

6) Rename 221pwnedFirmware.ipsw to 221pwnedFirmware.zip and extract.

7) From your custom 2.2.1 ipsw, extract these files:
   iBSS.n72ap.RELEASE.dfu    (name it iBSS221pwn.dfu)

8) Copy LLB.n72ap.RELEASE.img3 from your custom 2.2.1 ipsw to a separate folder name patch

9) Extract 24kpwn (LLB.n72ap.RELEASE.patch) into that folder as well

10) Open a terminal and cd to that folder

11) Apply the following one line at a time, pressing enter after each line
	bspatch LLB.n72ap.RELEASE.img3 LLB.n72ap.RELEASE.img3.new LLB.n72ap.RELEASE.patch
	rm -rf LLB.n72ap.RELEASE.img3
	cp LLB.n72ap.RELEASE.img3.new LLB.n72ap.RELEASE.img3
	rm -rf LLB.n72ap.RELEASE.img3.new

12) copy the new LLB.n72ap.RELEASE.img3 into 221pwnedFirmware/Firmware/all_flash/all_flash.n72ap.production

13) In terminal, CD to 221pwnedFirmware and enter the following command
	zip -r ../CustomFirmware.ipsw ./
	this is the firmware you will use to restore your iPod.
	
14) Put your iPod in DFU mode and connect it to your computer.

15) Put your ipt2g into DFU mode using keypresses.  Don't have iTunes running!

16) Start rslite.  Send the official iBSS from 2.1.1:
	!iBSS211.dfu

17) Start rslite again.  Send the redsn0w-lite patch:
	#pwn211ibss.txt

18) Send the patched iBSS from 2.2.1:
	!iBSS221pwn.dfu

19) Use iTunes to do a full restore using your custom 2.2.1 ipsw

20) Your iPod will now restart and you'll have a Untethered Jailbroken IT2G

[Sapskull]

Originally Posted by zackotronic

10) Apply the following one line at a time, pressing enter after each line
bspatch LLB.n72ap.RELEASE.dfu LLB.n72ap.RELEASE.dfu.new LLB.n72ap.RELEASE.patch
rm -rf LLB.n72ap.RELEASE.dfu
cp LLB.n72ap.RELEASE.dfu.new LLB.n72ap.RELEASE.dfu
rm -rf LLB.n72ap.RELEASE.dfu.new

11) copy the new LLB.n72ap.RELEASE.dfu into 221pwnedFirmware/Firmware/all_flash/all_flash.n72ap.production

didn't you mean LLB.n72ap.RELEASE.img3 instead of LLB.n72ap.RELEASE.dfu?

[Dashar]

Instead of rs lite would just the tethered version work?

[zackotronic]

Originally Posted by Sapskull

didn't you mean LLB.n72ap.RELEASE.img3 instead of LLB.n72ap.RELEASE.dfu?

yes your correct, i fixed it above

[collina]

Originally Posted by zackotronic

yes your correct, i fixed it above

Still off on a couple lines but the How-To worked and it is quite appreciated.

[zackotronic]

Originally Posted by collina

Still off on a couple lines but the How-To worked and it is quite appreciated.

fixed again

[wammybar6]

Where is the LLB.n72ap.RELEASE.patch file.

[thund3r]

Get it from the post in the this thread that Musclenerd posted.

[wammybar6]

Those commands don't work line by line or any way, help me!

[JimXTMD]

redsn0w lite
LIBUSB<~ Found
24kpwn (LLB.n72ap.RELEASE.patch) <= i found it~


where to download?

UNSUPPORTED TETHERED REDSN0W - REDSN0W LITE 101 ?

Which redsn0w should i use?
101 or 102??