[HOW TO] PWN Your iPhone/iPod Touch (WINDOWS ONLY)

[Khaos]

Well i created a successful guide for the mac version so i decided to make one for WinPWN

WinPWN Is Out But Is BETA, Use At Your Own Risk

I am in no way responsible of anything happens to your iPhone/iPod Touch, such as bricking

Look At This Before Pwning Your iPhone/iPod Touch


Credit For The Chart: Teslanaut

Pwnage (Windows Only)
1. Download Pwnage Here: http://winpwn.com/index.php/Main_Page

Make Sure You Download Both Files From The Website, WinPwn Beta, and iTunes.dll

Now Install WinPWN Then Put The iTunes.dll in C:/Program Files/cmw/winpwn

2. Download The 1.1.4 Firmware:
iPod Touch: Here
iPhone: Here
and save it somewhere
3. Restore your iPhone/iPod Touch normally (no restore mode or DFU mode) (Just click restore and update)(You have to be 1.1.4)
4. Put your iPhone/iPod Touch in DFU mode:

[HOW TO] Put iPhone/iPod Touch In DFU mode
1. Make sure your iPhone/iPod Touch is turned on and connected to iTunes
2. Hold the power and home button down at the same time till it turns off
3. As soon (like once you see) the iPhone/iPod Touch disappears (disconnects) from iTunes, let go of the power button but continue to hold the Home button
4. Wait till iTunes says "Your iPod is in recovery mode and has to be restored", if you look at your iPhone/iPod Touch the screen will be black...This is normal and your iPhone/iPod Touch is in DFU mode

If That Does Not Work, Do This:
1. Download iLiberty + For Windows at http://www.ipluspwns.com
2. Install and open it, at the top you will see "Other Tools" Click that then you will see "Enter DFU Mode" Click that

Back To Pwnage:
1. Now that you are in DFU Mode Restore Your iPhone/iPod Touch to 1.1.4 again
2. Close Everything you have opened, including this web-browser (Just remember this guide or write it on a piece of paper)
3. Open iTunes And Keep It Open
4. Open WinPWN
5. Put your iPhone/iPod Touch in restore mode:
1. Hit Browse .ipsw



2. For iPod Touch Users Open: iPod1,1_1.1.4_4A102_Restore.ipsw file and click Open.
For iPhone Users Open: iPhone1,1_1.1.4_4A102_Restore.ipsw file and click Open.
IT HAS TO END IT .ipsw AND BE 1.1.4, IF IT IS NOT DONT CLICK IT!!!
3. Make sure your iPhone/iPod Touch is plugged in and recognized by the computer, Click use iTunes or Use Libusb, most people use iTunes so click that, if You Use iTunes, Then Make Sure Its Open
4. Click iPwner and let it do its thing (DONT TOUCH ANYTHING WHILE IT DOES IT!!!)
5. It Should pop up with a message saying your device is in restore mode, it is not and you have to put it in restore mode, just follow this:

[HOW TO] Put iPhone/iPod Touch In Restore Mode:
1. Hold Power and Home button till it shuts off
2. Let go of both
3. Hold both of them down again till it turns on, when it does (You see the apple) Let go of the power button but continue to hold down the home button till you get the Connect To iTunes screen

If That Does Not Work, Try This:
1. Download iLiberty + For Windows at http://www.ipluspwns.com
2. Install and open it, at the top you will see 'Other Tools, click that then you will see "Enter Restore Mode" Click that

Pwnage Again
1. When its done it should boot up normally with a New boot screen and you should see slide to unlock, if you get Other screen with another picture after you see the new boot screen, thats ok too.
2. Now to create the Custom .ipsw, click IPSW Builder

You should see a screen like this:



Click the > Next To All Packages, Then Check Installer, Then Click Build ISPW

7. Click Installer and click BSD Subsystem

iPhone Users If You Want To Activate, And Unlock, Follow This Guide Also:
1. Click The Advanced Tab, you should see something like this:





Heres a definition of all of them:

Enable baseband update - Determines if the baseband update should be enabled in the custom ipsw. Only check this button if you wish to update the baseband modem portion of your iPhone. Warming! This may remove previous baseband unlocks or other modifications that have been previously made. If in doubt leave it unchecked.

Neuter bootloader - This will enable "Bootneutering" to the baseband firmware allowing custom firmware to be installed onto the iPhone baseband by convincing the iPhone that it is secure. Arbitrary secpacks and fls files will be accepted when the device is in this state. More info about bootneuter.

Under the BootNeuter checkbox will present two new options that are selectable these are -

Upgrade to 4.6 NB: Unless you understand this option you should avoid it.

Downgrade to 3.9 NB: Unless you understand this option you should avoid it.

Unlock baseband - This will enable the unlocking of the baseband to all networks using a custom "software unlock" process. This should be used if you plan to use a SIM card from a carrier other than the one provided by your original iPhone carrier.

Activate Phone - This will activate the phone so that it can be used with iTunes. This will bypass the Apple activation process and set the iPhone to be in an Activated state allowing access to the device's functions.

2. Choose What you want

3. Get the bootloader files, follow this guide (iPhone Only):

How To Get Bootloader Files (iPhone Only)
I am not directly linking it, you will have to do it this way
1. Go Here: http://gizmodo.com/375493/pwnage-iph...le-works-great
2. Hit Command + F
3. Type bootloaders and hit find twice, you should next to a link that says [rapidshare.com] Click that

Alternative:
1. Go Here: http://gizmodo.com/375493/pwnage-iph...le-works-great
2. Scroll down till you see a post that on the blue bar says:

by dagamer34 at 04:45 PM on 04/03/08

and the post should say

Rapidshare link for bootloaders: [rapidshare.com]

Click that

To open the .rar file:
In Windows, you need WinRAR
In Mac OS X, you need "The Unarchiver"

In there will be the 3.9 and 4.6 bootloader files, extract them somewhere

Back On Pwnage FINAL
1. Click build .ipsw and save it somewhere
2. Open iTunes and put your iPhone/iPod Touch in restore mode again
3. Hold shift and click restore, find the custom firmware and double click it

ALL DONE

Bootneuter Guide: http://wikee.iphwn.org/sgold_bootrom:bootneuter


Remember Rep Is Always Appriciated

Remember WinPWN is not out yet so probably some of this information is wrong

[Teslanaut]

Sooo, whered you get the chart?

Also, WinPWN isn't even out yet o.O

[albert_$n]

lol
nb guide... there is no WinPWN yet,
BAN HIM !!!!!!!!!!!!
XD

[Khaos]

Originally Posted by albert_$n

lol
nb guide... there is no WinPWN yet,
BAN HIM !!!!!!!!!!!!
XD

lol, i said in the guide like 20 times, WinPWN is not out yet, so this guide might not be accurate

Originally Posted by Teslanaut

Sooo, whered you get the chart?

Also, WinPWN isn't even out yet o.O

Lol, do you want any credit because ill put it there, i wasn't sure if you made it or found it

[Teslanaut]

Originally Posted by khaos139

Lol, do you want any credit because ill put it there, i wasn't sure if you made it or found it

I made it

You found it in my Thread right?

Don't need to credit. Just makin sure

[Khaos]

Originally Posted by Teslanaut

I made it

You found it in my Thread right?

Don't need to credit. Just makin sure

No i insist, ill give you credit on both mac and windows pwnage guides, and yes i found it from your post when some guy asked if it was worth pwning

[Khaos]

Updated it to work with the beta, hope you like the guide !

[610925]

Is there any way i can do this WITHOUT losing all of my dataz?

[flame777]

Originally Posted by 610925

Is there any way i can do this WITHOUT losing all of my dataz?

Thats possibly the strangest way to say "data" ever created... And No there isn't. Just Use iBackup to restore all your apps and settings after PWNing.

and before you ask what iBackup is, Use the Search.



Have a nice Day.

[mikee1680]

anyone have problems with the windows version? want to make sure it works before i try it. also, if it works with the 32gb version.